Flosense - Multi Sensor Monitor

FloSense, provides visibility of key cooling circuit metrics, improves efficiency, enhances productivity and profitability.

REMOTE MOUNT DISPLAY

Using a 4.3” high resolution touch display and an innovative bracket design. FloSense can be remote mounted in a convenient location and by using the integral magnets the unit can be simply placed on the side of the moulding machine

TURBULENT FLOW

Often regarded as a key indicator in the efficiency of a mould cooling circuit, FlowSense is fitted with a turbulent flow indicator. The unit will indicate laminar, transitional and turbulent flow as well as monitoring the Reynolds number, based on flow diameter and percentage glycol in the system.

PLUG & PLAY

Connect the unit to different size flow sensors with flow rates up to 200 litres per minute.

With full ‘Plug and Play’ connectivity FlowSense will automatically identify the flow rate of the sensor that it is connected to adjusting the scales automatically. The vortex style flow sensors are all stainless steel construction and rated up to 120°C as standard.

Endlessly configurable, FloSense is available with a range of components to suit most injection moulding set-ups. If you would like any help, or are unsure about its suitability for your particular requirement, please contact one of our experts.

DELTA T & DELTA P MONITOR

Connect the Pressure & Temperature Sensor (PS100-G1/2) on the inlet feed and the Flow Sensor (FS..)

on the return outlet to monitor the heat exchange (Delta T) and pressure loss (Delta P).

This will allow you to monitor any variations in the process to ensure perfect production setup.