Compact and smart controller for 6 or 12 zones.

Offering precise control temperature in the hot runner system, these digital hot runner controllers improve production efficiency, reduce production costs and ensure stability during the injection moulding process.

With a 7 LCD display touch panel you can display real-time temperature and other control parameters, such as: mould leakage detecting, synchronous heat up and cool down, mould memory, group setup function, lower balance detection and self diagnosis log.

The unit also supports injection machine connect for I/O function and optional and has a VNC function, achieving intelligent one-stop production control.

• Thermocouple type: J/K
• Temperature unit: °C/°F
• Heating mode selectable
• The maximum drive current is 15 ampere for each zone
• Temperature PID control
• Zero cross/Phase angle output trigger modes
• Auto detect the frequency of power source
• The current detect and display
• The output with auto/manual setting
• The soft-start for dehumidification
• Boost
• Standby
• Output mode: Stop/Manual/Slave/continually selectable when Thermo-coupler broken
• Overload protection for electric Overload protect for heating output
• The protect mode of power source when wrong input
• Auto shutdown when abnormal work on module
• The fast fuse used to protect TRIAC